Skip to content

Lyman Turret Press: How to Choose and Use the 8 and All-American Models

By Published 6 min read

As an Amazon Associate we earn from qualifying purchases, at no cost to you.

On this page (7 sections)
  1. What the Lyman Turret Press Actually Is
  2. How the Turret System Works for Your Workflow
  3. Common Mistakes and Myths About Lyman Turrets
  4. Choosing Between Lyman, RCBS, and Lee Turrets
  5. How to Set Up and Maintain Your Turret Press
  6. The bottom line
  7. Frequently asked questions

You are looking at the Lyman All-American 8 or a T8 turret press and need to know if it fits your reloading station. You want a straight look at how the turret system works, what parts to buy, and how to avoid the headaches that slow down your reloading.

In short: The Lyman turret press uses a rotating head to hold multiple die sets, letting you switch from a .308 Winchester to a .223 Remington in seconds without changing dies. It is best for loaders who shoot multiple calibers and want speed. You must ensure your dies have the correct thread size and that the press is securely clamped to a heavy bench.

Our pick

Tap to see today's price on Amazon
Best for multi-caliber loadersLyman All-American 8 Turret Press

The 8-station turret holds four complete die sets, making caliber swaps the fastest step in your workflow.

Check price on Amazon

What the Lyman Turret Press Actually Is

Lyman Turret Press: How to Choose and Use the 8 and All-American Models

A Lyman turret press is a single-stage reloading press with a rotating head. Instead of one fixed die holder, it holds a disc with multiple slots for die sets. The classic model is the All-American 8, which has an extra-large turret with eight stations. We cover rcbs turret press pros in a guide of its own.

Think of it as a carousel for your dies. You load one die set in station one, another in station two, and so on. When you are done with the .308, you rotate the turret 90 degrees, and the .223 dies are in position. You do not have to unscrew and swap dies every time you change ammo.

Lyman also makes the T8 Turret and older models like the Master Turret. All use the same basic principle: a heavy cast iron frame, a locking mechanism, and a removable turret head.

  • All-American 8: Holds up to four 2-die sets or two 4-die sets.
  • T8 Turret: Similar capacity, slightly older design, same interface.
  • Key feature: The turret is removable. You can pull the whole head off the press to swap out to a single-stage adapter if you ever need to.

Pro tip: Always check that your dies are 7/8-14 thread size. This is the standard for Lyman turret presses. If you have non-standard dies, they will not fit. Before you buy anything, it is worth looking at hornady ap turret press.

Recommended for this stepLyman All-American 8 Turret Press

This press is the current standard for Lyman turret owners, with a larger frame and easier turret removal than older models.

  • Heavy duty cast iron frame and turret.
  • Extra-large 8 station turret is easily removed to make swapping turrets simple.
Check price on Amazon

How the Turret System Works for Your Workflow

The magic is in the locking mechanism. When the turret is in the “work” position, the dies align with the shell holder on the die body. When you rotate it, the mechanism locks the turret in place. You cannot reload with the turret spinning.

Here is the practical workflow:

  1. Load dies: Screw your die sets into the open stations on the turret. Do not over-tighten.
  2. Set up: Align station one with the press center. Lock the turret.
  3. Reload: Work through your first batch. When finished, unlock the turret.
  4. Rotate: Turn the turret to the next station. Lock it.
  5. Verify: Before seating the first cartridge, check that the new die is fully engaged. A slight mismatch can bend your brass.

This is faster than a single-stage press when you change calibers. It is slower for a single batch of one caliber because the turret head is heavier and takes up more vertical space.

Safety first: Never force the turret rotation. If it sticks, stop. Forcing it can strip the locking mechanism or damage the frame. The other half of this decision is rcbs turret press models.

Common Mistakes and Myths About Lyman Turrets

Common Mistakes and Myths About Lyman Turrets

Many shooters have issues with Lyman turret presses because of setup, not the press itself. Here are the myths and facts.

Myth: You need a special press plate.

Fact: Most Lyman turret presses use a standard 7/8-14 thread die body. You can use a standard reload press plate, but the turret head is bulky. A heavy-duty press plate with a wide footprint helps stability.

Myth: The primer catcher is required.

Fact: A primer catcher is not part of the turret press. It is a separate accessory that attaches to the feed rod or sits under the case. It catches spent primers. It does not affect the turret mechanism. If you want one, look for a Lyman or RCBS brand catcher that fits your specific press feed hole.

Myth: You can use any die set.

Fact: You need 2-die sets or 4-die sets that fit the 7/8-14 thread. A 3-die set will not fit the standard Lyman turret slots without adapters, which are hard to find. Stick to 2 or 4 die sets.

Recommended for this stepRCBS Pro Chucker 7 Shell Plate 38

A one-touch plate makes switching between turret and single-stage heads easier, a common need for turret owners.

  • Pro Chucker 7 shell plate number 38
  • Allows for quick transition between calibers
Check price on Amazon

Choosing Between Lyman, RCBS, and Lee Turrets

Choosing Between Lyman, RCBS, and Lee Turrets

You have three main turret press families: Lyman, RCBS, and Lee. They all do the same job but feel different.

  • Lyman (All-American 8 / T8): Heavy cast iron frame. The turret is removable. The locking mechanism is robust. Best for people who want a “set and forget” press that will last decades.
  • RCBS (Chargers / Turret): RCBS turret presses are also heavy. They often have a slightly different turret locking style. Parts are widely available.
  • Lee (Turret): Lee turret presses are generally more budget-friendly. The turret mechanism is lighter. Some owners report the locking ring feels less positive than Lyman or RCBS.

If you already own Lyman dies, get a Lyman press. The thread sizes and die body diameters are consistent within the brand. Mixing die brands on a turret press is possible but requires careful checking of die body diameter and thread depth. If that sounds like your bench, read up on comparing the die capacity next.

Recommended for this stepRCBS AR Series Small Base Die Set .308 Win

If you are mixing brands, ensure your die sets match the press thread spec. This RCBS die set is a standard 7/8-14 thread, which fits most turret presses.

  • Type: 2 Die Set
  • Fits: 308 Winchester
Check price on Amazon

How to Set Up and Maintain Your Turret Press

A turret press is only as good as its setup. A loose turret or misaligned dies will cause headspace issues and inconsistent bullet seating.

  1. Clamp the press: Use the press clamps that came with it. The press must not move when you pull the handle. If it does, tighten the clamps.
  2. Check the turret index: Ensure the turret rotates smoothly and locks firmly. If it feels loose, clean the locking ring with a light machine oil.
  3. Align dies: For each station, lower the ram fully and check that the die is centered over the shell holder. Use a feeler gauge or a visual check with a straight edge.
  4. Test with brass: Run a piece of brass through each station. Check the firing pin hole for alignment. If the primer is not centered, your die is off.

Maintenance is simple. Clean the turret and locking ring every 500 rounds. Inspect the die threads for nicks. If the turret is sticky, disassemble it if possible, clean the rails, and re-lube.

Pro tip: Keep a log of which die set is in which station. A photo of your loaded turret helps you remember the setup for next time.

The bottom line

If you shoot more than two calibers, a Lyman turret press like the All-American 8 will save you time on every caliber change. If you only shoot one or two calibers, a single-stage press is simpler and cheaper. The next step is to ensure your bench is heavy enough and your dies match the 7/8-14 thread spec.

Our top pickLyman All-American 8 Turret Press
  • Heavy duty cast iron frame and turret.
  • Extra-large 8 station turret is easily removed to make swapping turrets simple.
Check price on Amazon

Frequently asked questions

Can I use a Lyman turret press for a 10mm pistol cartridge?

Yes, but you need the correct die set. The press handles the cartridge case size as long as the dies are standard 7/8-14 thread. For pistol cartridges, you may need a shorter die body to ensure the bullet seats correctly without hitting the case mouth.

What is the difference between the Lyman T8 and the All-American 8?

The All-American 8 is the newer model with a larger frame and an easily removable turret head. The T8 is the older design. Functionally, they do the same job. The All-American 8 is easier to modify and has a more robust locking mechanism. It helps to understand lyman all american 8 die before going further.

Do I need a primer catcher for a Lyman turret press?

No, it is not required for operation. It is a convenience tool to keep your bench clean. If you want one, check for a Lyman or generic primer catcher that fits your specific press model’s feed hole.

Can I swap the turret head for a single-stage adapter?

Yes. The Lyman turret head is removable. You can buy a single-stage adapter for the All-American 8 or T8. This lets you use the press as a standard single-stage press if you prefer that workflow.