Hoppes No. 9 Deluxe Kit: Full Component List and What You Actually Need

You just bought the Hoppes No. 9 Deluxe kit and are staring at the tangle of rods, brushes, and tins, wondering which piece fits your rifle and which is just filler. This page lists every component in the box and tells you exactly what does the work on common calibers.

Every part in the No. 9 Deluxe kit, sorted by function

The Hoppes No. 9 Deluxe kit is built around a three-piece brass rod system. This modular design lets you use a single piece for pistols, two for most rifles, and three for shotguns and long-barreled rifles. The rod threads together firmly but should always be seated completely before pulling a patch to prevent the rod from slipping. It helps to understand organizing your cleaning supplies before going further.

Here is what is actually in the tin, grouped by what it does:

• 3-Piece Brass Rod: Durable, non-magnetic, and rust-resistant. The classic choice for most owners because it does not scratch the bore and lasts for decades.
• Phosphor Bronze and Brass Brushes: Sized for .22, .24, .32, .41, 9mm, .38, .44, and 12-gauge. Bronze is soft enough for most barrels; hard brass is for stubborn fouling.
• Knob-Style and Slotted Patch Pullers: The knob puller holds one patch for standard calibers. The slotted puller holds two or three patches for larger bores or tight-fitting ammunition.
• Small Mop and Large Mop: The small mop cleans the inside of the chamber. The large mop wipes the exterior of the action and bolt faces.
• Hoppe’s No. 9 Cleaner and Lubricating Oil: A solvent that breaks down carbon and copper fouling, and an oil that protects metal from rust.
• Cotton Patches: A stack of 100% cotton patches. They are durable, do not shed synthetic fibers, and hold solvent well.

Who this kit is for (and who should skip it)

The No. 9 Deluxe is the default recommendation for someone who owns a .22 rifle, a 9mm pistol, and a 12-gauge shotgun. It covers the vast majority of common calibers. For the detail, see our notes on glory fire elite kit.

If your load data for your specific firearm is not in the manual, check the maker’s current spec sheet for the correct bore diameter and then match it to the included brushes.

It is less useful if you primarily shoot large-bore rifles like .338 or .50 BMG, or if you have a huge collection of obscure historical calibers. In those cases, the kit’s fixed brush set may not have the correct size, and you would need to buy individual brushes.

Why the brass rod and phosphor bronze brushes matter

Many modern kits use coated steel or aluminum rods to cut cost. The Hoppes No. 9 Deluxe sticks with brass. Brass is softer than steel, which means it will not gouge your barrel’s rifling.

It is also non-magnetic, so it will not interfere with modern optics or triggers. You can feel the weight of the brass pieces, which gives you better feedback on fouling levels. For the detail, see our notes on rifle bore care.

The phosphor bronze brushes are the other standout. They are flexible enough to clean bore crowns and muzzles without leaving the hard marks that some stiff steel brushes can create. For a shooter who wants to preserve the blueing or parkerizing on their action, these brushes are the safer choice.

What shoots up the cleaning speed (and what slows it down)

The biggest time-saver in the kit is the patch puller. Instead of using a jag that holds a single patch, the slotted puller holds two patches. This means you pull the patch through the bore twice in one motion, wiping out solvent and leaving a cleaner finish. For a long-barreled rifle, this saves significant effort.

The main drawback is the case. It is a tin, not a hard plastic or molded case. It protects the parts from moisture, but it does not organize them with separate compartments. If you drop the tin, the small jags and brushes will mix. You will spend more time sorting them than if you used a compartmentalized case.

Alternatives worth a look if the No. 9 Deluxe feels too basic

If you want a more robust tin for hunting, the Hoppes Deluxe Gun Cleaning Kit (P2) is the step up. It uses the same cleaning chemistry but comes in a larger, more durable container that is easier to carry in a gun bag.

If you are looking for a kit with a hard-shell case and more brush options, the Motanar Gun Cleaning Kit (P3) is a strong alternative. It includes stainless steel, brass, and nylon brushes in a single compartmentalized case.

The nylon brushes are a good addition for very delicate barrels that you do not want to contact with metal. We go through rifle carbon solvent picks step by step in its own article.

The bottom line

Frequently asked questions