Frankford Arsenal Platinum Series Stand: Unboxing Setup Guide
By Amis Thains Updated 5 min read
As an Amazon Associate we earn from qualifying purchases, at no cost to you.
On this page (7 sections)
You just opened the box for your Frankford Arsenal Platinum Series stand, but the hardware bag is confusing and you're not sure how to make it rigid. This page walks you through the unboxing, assembly, and leveling process so you skip the guesswork.
In short: The stand features a foldable steel frame with an adjustable tabletop that locks between sitting and standing heights. Unboxing requires sorting the included bolts and feet, then attaching the base legs and table top. You must level the unit on a solid surface to prevent the entire reloading station from walking while the press cycles.
Our pick
Tap to see today's price on Amazon
Provides the adjustable height and foldable storage needed for the Platinum case prep system.
What’s in the box and how to sort it
Start by emptying the packaging onto a clean surface. The stand arrives with the frame, tabletop, and hardware separated. Look for the long bolts that secure the legs to the base plate and the smaller screws for the adjustable feet. Loaders in this spot often ask about intellidropper 2.0 performance review as well.
Before touching the stand, check the tabletop surface for scratches or manufacturing flaws. Since this stand holds your entire reloading station, a damaged top can transfer vibrations to your press. If you find damage, report it immediately.
- Frame components: Check for bent legs or stripped threads.
- Hardware bag: Sort bolts by length; do not mix them up.
- Tabletop: Ensure the locking mechanism for height adjustment is free.
Pro tip: Keep the original box until you confirm every part works. It is your warranty packaging if you need to ship it back.
This is the specific stand frame you are assembling from the box.
- Tabletop is adjustable from 28.5” – 45” tall and 13” x 12” – 39” x 12” W with a frame
- Stable enough to leave standing, but can be easily folded up for convenient storage or
Assembly steps: From flat pack to stable base
Assembly is straightforward but requires two people for the tabletop attachment. Begin with the base frame. Attach the four legs to the central base plate using the provided long bolts. Do not fully tighten them yet; hand-tighten only.
Next, attach the adjustable tabletop. Align the mounting holes and insert the bolts. Tighten these evenly, turning one quarter at a time to avoid warping the frame. Once the tabletop is secure, you can fully torque the leg bolts to the base plate.
The stand’s steel construction is designed to support significant weight, but the joint between the legs and the base is the primary stress point. If the frame feels loose after assembly, re-check the torque on these specific bolts. A rigid base is essential for consistent case prep work.
- Attach legs to base plate (hand-tighten).
- Position tabletop and insert bolts.
- Torque tabletop bolts evenly.
- Tighten leg-to-base bolts securely.
Adjusting height and leveling the stand
The stand’s main feature is its adjustable height, ranging from 28.5 to 45 inches. Turn the central adjustment mechanism to raise or lower the tabletop. Find the height where your elbows rest comfortably above the table surface. If that sounds like your bench, read up on fixing charge creep on intelladropper next.
Leveling is critical. Use the adjustable feet to sit the stand flat on the floor. Place a bubble level on the tabletop. If the stand rocks, it will vibrate under the weight of a progressive press. A perfectly level stand keeps your case gauge readings consistent.
- Sitting position: Set height to 28.5-32 inches.
- Standing position: Set height to 40-45 inches.
- Leveling: Adjust feet until the bubble is centered in all directions.
Pro tip: Lock the height adjustment handle firmly. A loose handle will let the stand sink under the weight of your tools over time.
Common mistakes that ruin stability
Most unboxing errors come from rushing the assembly. A frequent myth is that the stand is rigid enough without the feet adjusted. Fact: The adjustable feet bear the load; if they aren’t touching the floor, the frame bends under pressure.
Another error is placing the stand on a soft mat. Myth: A thick yoga mat prevents scratches. Fact: It prevents the feet from gripping, causing the stand to slide when you lean on it. Use a thin rubber mat or place the stand directly on a hard floor.
Finally, check the folding mechanism. The stand can fold for storage, but if the hinge pins are not lubricated, they will grind. Apply a small amount of dry lubricant to the pins now.
When you need this specific stand
This stand is designed for the Frankford Arsenal Platinum Series case prep system. It offers the surface area and weight capacity needed for a motorized trimmer and media tumbler. If you only hand-reload on a small workbench, this stand is overkill. The other half of this decision is frankford arsenal ammo vault.
However, if you process large batches, the foldable design lets you move the entire station from your garage to your basement in minutes. It creates a dedicated workspace that keeps your dies and powder measures organized in one spot.
The bottom line
The Frankford Arsenal Platinum Series stand is a solid, adjustable base that solves the problem of having no dedicated reloading station. Assemble it on a hard floor, level the feet, and lock the height before adding your press. This next step ensures your case prep tools stay stable during high-volume production.
- Tabletop is adjustable from 28.5” – 45” tall and 13” x 12” – 39” x 12” W with a frame
- Stable enough to leave standing, but can be easily folded up for convenient storage or
Frequently asked questions
Can the stand be folded while the press is on it?
No. Remove all equipment from the tabletop before folding the stand. The hinge mechanism is not designed to support heavy dynamic loads while folding.
What size of press fits on this stand?
The tabletop is 13 to 39 inches wide. It easily fits a single progressive press, a hand press, or the Platinum Series case prep system. Do not stack two large progressive presses.
Is the steel frame heavy enough to prevent sliding?
The frame is substantial, but on smooth floors, it can slide if the feet are not properly engaged. Use the adjustable feet to dig into the floor or use a non-slip mat.
How do I maintain the folding hinges?
Wipe the pins clean and apply a drop of dry lubricant every six months. This prevents grinding noise and keeps the folding action smooth for storage.